Product Catalog
Subscriptions
Get mail on new products
Consultant
A、 The Use Introduction, Installation and Maintain of Lighting
Floodlight Luminaire
The Green Floodlight Luminaire that sells by our company is produced according to the standard of GB7000.1 and GB7000.7, and it has passed national CQC Product Quality Attestation, it is a first choice brand for outside advertisement.The Green Floodlight Luminaire that sells by our company is produced according to the standard of GB7000.1 and GB7000.7, and it has passed national CQC Product Quality Attestation, it is a first choice brand for outside advertisement. This product is suitable for square, station, dock, construction site, advertisement sign, road, high pole street lamp, virescence, etc. Especially, it is suitable for lighting of high floor building and palestra. Before installing or maintaining this product, please read a manual carefully first, it must be operated by qualified technician's operation. Before installation or maintain, make sure don't close the power, the inappropriate installation and maintain or can't operate according to the instruction of this manual, may result in getting an electric shock and death or important property loss. Please remove it to customer.
The Installation or Maintain of Floodlight Luminaire
1 、 The lighting can't be operated except guarantee that cutting off the state of the power while installing and maintaining.
2 、 Lighting wiring should according to the correct wiring of wiring diagram, and keep firmly, lighting should get credible earth.
3 、 When the import line through export loop enter lamps, should tighten import line, in case the rainwater enter into light through import line, cause the electric apparatus to be damaged.
4 、 The environment of lighting's use: there is no canker and flammability all around it.
5 、 The part joints lighting plank should be firmed, in case the environment for use and other factors cause unexpected.
6 、 Suitable environment temperature of lighting: -30℃～+50℃
7 、 The pressure of electrical source should keep waving during 95 --- 105 of 220V,( 1800W 、 2000W lighting use 380V electrical source ). Oversize undulation will influenced electric apparatus, life-span, display capability and natural start-up kindling.
8 、 All of lamp-house must use corresponding specification ballast, trigger together with the light source, in order to reduce the influence of using life or mangle.
9 、 Electrical trigger can't work long times under empty loading condition, during the working progress of bulb, because of cut out or other reasons cause the bulb goes out, in order to guarantee the trigger don't attaint.
10 、 After bulb is lighted, working temperature is high relatively, if need to maintain, should cut off some sources first, go on after the bulb is cooled, in order to avoid scalding.
11 、 This light is a totally airproof type, it can't be used after installation or maintaining, must guarantee it is sealed and already worked.
2 、 Lighting wiring should according to the correct wiring of wiring diagram, and keep firmly, lighting should get credible earth.
3 、 When the import line through export loop enter lamps, should tighten import line, in case the rainwater enter into light through import line, cause the electric apparatus to be damaged.
4 、 The environment of lighting's use: there is no canker and flammability all around it.
5 、 The part joints lighting plank should be firmed, in case the environment for use and other factors cause unexpected.
6 、 Suitable environment temperature of lighting: -30℃～+50℃
7 、 The pressure of electrical source should keep waving during 95 --- 105 of 220V,( 1800W 、 2000W lighting use 380V electrical source ). Oversize undulation will influenced electric apparatus, life-span, display capability and natural start-up kindling.
8 、 All of lamp-house must use corresponding specification ballast, trigger together with the light source, in order to reduce the influence of using life or mangle.
9 、 Electrical trigger can't work long times under empty loading condition, during the working progress of bulb, because of cut out or other reasons cause the bulb goes out, in order to guarantee the trigger don't attaint.
10 、 After bulb is lighted, working temperature is high relatively, if need to maintain, should cut off some sources first, go on after the bulb is cooled, in order to avoid scalding.
11 、 This light is a totally airproof type, it can't be used after installation or maintaining, must guarantee it is sealed and already worked.
Earth-embedded Luminaire
The earth-embedded luminaire that our company sells is produced strictly according to national GB7000.1 and GB7000.12, It has passed National CCCC Quality Certificate. And it is the first choice for outside lighting. This product is used widely in square, park, footpath, street, etc. especially suitable for setoff lighting of trees for virescence belt. Before install or maintain a product, please read a manual carefully first, and must operate from qualified technician of electric apparatus, can't close the power before installation or maintain. Unsuitability installation and maintain or operate without introduction will bring on bruise and death, or big loss of property. After finishing installation, please transfer this manual to users.
The Installation or Maintain of Earth-embedded Luminaire
1 、 The light can't operate except guarantee that cutting off the state of the power while installation or maintaining,
2 、 The surface of lamps forbid being covered by any objects.
3 、 Laying some detritus and sand around the base of lighting, in order to drainage and radiating.
4 、 When the import line through export loop enter lamps and lanterns, should tighten import line, in case rainwater enter into light through import line, cause the electric apparatus to be damaged.
5 、 Lighting lamp-house for 15 minutes before the lighting covers with glass, in this way, the lining of glass will not appear fog during the using course.
6 、 The environment of lighting's use: there is no canker and flammability medium being around it.
7 、 Suitable environment temperature of lighting: -30℃～+50℃ 。
8 、 The pressure of electrical source should keep waving during 95 --- 105 of 220V,( 1800W 、 2000W lighting use 380V electrical source ). Oversize undulation will influenced electric apparatus, life-span, display capability and natural start-up kindling.
9 、 All of light source must use corresponding specification ballast, trigger together with the light source, in order to reduce the influence of using life or mangle.
10 、 The electrical trigger can't work long times under empty loading condition, during the working progress of bulb, because of cut out or other reasons cause the bulb goes out, in order to guarantee the trigger don't attaint.
11 、 After bulb is lighted, working temperature is high relatively, if need to maintain, should cut off some sources first, go on after the bulb is cooled, in order to avoid scalding.
12 、 This light is a totally airproof type, it can't be used after installation or maintaining, must guarantee it is sealed and already worked.
2 、 The surface of lamps forbid being covered by any objects.
3 、 Laying some detritus and sand around the base of lighting, in order to drainage and radiating.
4 、 When the import line through export loop enter lamps and lanterns, should tighten import line, in case rainwater enter into light through import line, cause the electric apparatus to be damaged.
5 、 Lighting lamp-house for 15 minutes before the lighting covers with glass, in this way, the lining of glass will not appear fog during the using course.
6 、 The environment of lighting's use: there is no canker and flammability medium being around it.
7 、 Suitable environment temperature of lighting: -30℃～+50℃ 。
8 、 The pressure of electrical source should keep waving during 95 --- 105 of 220V,( 1800W 、 2000W lighting use 380V electrical source ). Oversize undulation will influenced electric apparatus, life-span, display capability and natural start-up kindling.
9 、 All of light source must use corresponding specification ballast, trigger together with the light source, in order to reduce the influence of using life or mangle.
10 、 The electrical trigger can't work long times under empty loading condition, during the working progress of bulb, because of cut out or other reasons cause the bulb goes out, in order to guarantee the trigger don't attaint.
11 、 After bulb is lighted, working temperature is high relatively, if need to maintain, should cut off some sources first, go on after the bulb is cooled, in order to avoid scalding.
12 、 This light is a totally airproof type, it can't be used after installation or maintaining, must guarantee it is sealed and already worked.
B、 Lighting Knowledge
I class I luminaire:
The electroshock—prevent protection of lighting not only depends on basic insulation, but also includes additional safety measure, Namely put the apt touch and conductive part connected to the protection wire in the regular circuit of facilities, make conductive part unlikely electrification when its basic insulation is invalidation.
Defend grade of lighting crust
IP20 ： Prevent solid eyewinker which bigger than 12mm. The diameter or thickness of tool and wire which bigger than 2.5mm. the diameter of solid eyewinker exceed 2.5mm.
IP54 ： Dustproof , waterproof. It can't prevent dust enter entirely, But the degree that the entering amount can't reach and hinder the equipment from running well; there is no harmful influence that dabbles in any direction
IP65 ： Airproof, waterproof. There is no dust entered: there is no harmful influence that dabbles in any direction .
IP67 ： Airproof, waterproof. There is no dust entered: immerging into water with stated pressure and time, and the water quantity can't reach bad degree.
IP54 ： Dustproof , waterproof. It can't prevent dust enter entirely, But the degree that the entering amount can't reach and hinder the equipment from running well; there is no harmful influence that dabbles in any direction
IP65 ： Airproof, waterproof. There is no dust entered: there is no harmful influence that dabbles in any direction .
IP67 ： Airproof, waterproof. There is no dust entered: immerging into water with stated pressure and time, and the water quantity can't reach bad degree.
Ray and Radiation:
Light means electromagnetic wave radiates eyes, and it changed into the light by vision nerve, that part of spectrum can be seen by the naked eyes. The wavelength range of this radial is from 360nm to 830nm. It's just a small part of electromagnetism radiation spectrum. The temperature is up to 50Hz, in order to produce white table with higher color temperature and better coloration
3 、 Luminous Flux Φ
Unit: Lumen [lm]
The luminous flux means the summation of lamp-house radiation and incept by eyes. ( Φ ).
Light means electromagnetic wave radiates eyes, and it changed into the light by vision nerve, that part of spectrum can be seen by the naked eyes. The wavelength range of this radial is from 360nm to 830nm. It's just a small part of electromagnetism radiation spectrum. The temperature is up to 50Hz, in order to produce white table with higher color temperature and better coloration
3 、 Luminous Flux Φ
Unit: Lumen [lm]
The luminous flux means the summation of lamp-house radiation and incept by eyes. ( Φ ).
Luminous Intensity l
Unit: cd
Generally speaking, Light is eradiated in different directions, and the intensity is different. The luminous intensity means the emanant intension of visible light transmit from a special direction corner. ( l ).
Unit: cd
Generally speaking, Light is eradiated in different directions, and the intensity is different. The luminous intensity means the emanant intension of visible light transmit from a special direction corner. ( l ).
Illuminance E
Unit: [lx]
Illuminance ( E ) is a scale quotiety between luminous flux and irradiation square.
1 lx means the brightness degree of 1 lm luminous flux is distributing averagely on lm2.
Unit: [lx]
Illuminance ( E ) is a scale quotiety between luminous flux and irradiation square.
1 lx means the brightness degree of 1 lm luminous flux is distributing averagely on lm2.
Luminance L
Unit: [cd/m2]
Luminance ( L )
Luminance shows eyes see reflect light intensity of objects from a place.
Unit: [cd/m2]
Luminance ( L )
Luminance shows eyes see reflect light intensity of objects from a place.
Light Effect
Unit: lm/w
luminosity efficiency means the efficiency of electricity power transforms into light energy
Unit: lm/w
luminosity efficiency means the efficiency of electricity power transforms into light energy
Color temperature
Unit: K
When the color issued from lamp-house is same as the “ black body” color under radiation, the temperature of “ black body” can be called color temperature of lamp-house. The higher the temperature of "black body" is , the blue compositions are more in spectrum, red compositions are less. For example, the lighting color of incandescent lamp is warm white color, the color temperature denotes 2700K, The color temperature of the sunlight fluorescent lamp shows the method is 6000K.
Unit: K
When the color issued from lamp-house is same as the “ black body” color under radiation, the temperature of “ black body” can be called color temperature of lamp-house. The higher the temperature of "black body" is , the blue compositions are more in spectrum, red compositions are less. For example, the lighting color of incandescent lamp is warm white color, the color temperature denotes 2700K, The color temperature of the sunlight fluorescent lamp shows the method is 6000K.
Light Color
The light color is the color temperature in fact. It can be divided into three big classes:
Warm Color<3300K
Demitint:3300 to 5000K
Because of there are so many differences in spectrum. So even if the light color is same, the coloration capability of lamp is different.
The light color is the color temperature in fact. It can be divided into three big classes:
Warm Color<3300K
Demitint:3300 to 5000K
Because of there are so many differences in spectrum. So even if the light color is same, the coloration capability of lamp is different.
Efficiency of Lighting
Efficiency of Lighting called light export index. It is an important standard to weigh the using energy efficiency of lamp. It is a proportion between export and import light energy of lamp.
About the details of indoor artifical light line, please read DIN5035 criterion.
Coloration Capability Efficiency of Lighting called light export index. It is an important standard to weigh the using energy efficiency of lamp. It is a proportion between export and import light energy of lamp.
About the details of indoor artifical light line, please read DIN5035 criterion.
In principle, the artificial light should be the same as natural light, Enable people's naked eye to distinguish the colors of the things correctly, of course, it is depend on position and purpose of lighting.
Coloration capability means the present degree from lamp-house to object color. Usually named " Coloration Index "( Ra).The coloration capability means the relations shown under the true colors of the things and a certain standard sources. The confirm of Ra value is compare 8 kinds of test colors defined in DIN6169 standard with this lamp-house, the smaller the better. When the Ra value is 100, it means the color of things is same as standard sources under their light.